LED Drivers / Power Supplies

Part # LED120A0012V50F Phillips Advance led power supply 12v - 60 Watt Input Volts: 120vMax. output power: 10~60WOutput Voltage: 12vOutput Current: .8~5AOperating Temp.: -40°~140°FInput Current: .63AMax. input power: 75WEnviron. Protection...

Part # LED120A0012V10F Phillips Advance led power supply 12v - 12 WattInput Volts: 120vMax. output power: 12WOutput Voltage: 12vOutput Current: 1.00AOperating Temp.: -40°~140°FInput Current: .13A Max. input power: 15WEnviron. Protection Rating:...

Part # LED-1260MMPS This France led power supply is 12v - 60 Watt for powering LEDs. It has no minimum loading requirement and is designed to operate reliably at full rated power at the maximum rated ambient temperature. There is no need to under load...

Part # HLG-320H-12AThis Meanwell led power supply has a high power factor (>0.98/115VAC). It is cooled by free air convection and has short circuit, over load, and over voltage protection. It also has an IP65 rating. The output voltage and constant...

Part # HLG-240H-12AThis Meanwell led power supply has a high power factor (>0.98/115VAC). It is cooled by free air convection and has short circuit, over load, and over voltage protection. It also has an IP65 rating. The output voltage and constant...

Part # GEPS24D-80U Dimmable Tetra 24VDC/80W Power Supply is damp rated and self-contained. Can be used with a 0-10v dimming controller. Input Voltage: 90-305vInput Current: 1.1AOutput Voltage: 24vdcOutput power: 80wDimensions: 9.5" x 1.7" x 1.2" NOTE:...

Part # GEPS24-300U-GLX2 Tetra 24VDC/300W Power Supply is dry and damp location rated. Remote or raceway use with (3) 96 watt output banks. Class 2 Power Supply: Input Voltage 120-277VAC. Input Current: 2.55AOutput Voltage: 24vdcOutput power: 288w -(3)...

Part # GEPS24-25U-NA Tetra 24VDC/25W Power Supply is dry and damp location rated. Remote or raceway use with 1 output bank. Class 2 Power Supply: Input Voltage 100-277VAC. Click here for GEPS24-25U-NA installation and loading instructions.

Part # GEPS24-180U Tetra 24VDC/180W Power Supply is dry and damp location rated. Remote or raceway use with 2 output banks. Class 2 Power Supply: Input Voltage 90-305VAC. Input Current: 0.7AOutput Voltage: 24vdcOutput power: 180w totalDimensions: 15.5" x...

Part # GEPS24-100U-NA Tetra 24VDC/96W Power Supply is dry and damp location rated. Remote or raceway use with 1 output bank. Class 2 Power Supply: Input Voltage 108-305VAC. Click here for installation information.

Part # GEPS12-60U-NA Tetra 12VDC/60W Power Supply is dry and damp location rated. Remote or raceway use with 1 output bank. Class 2 Power Supply: Input Voltage 108-305VAC. Replaces the discontinued GEPS12-60 and the GEPS12-60U

Part # GEPS12W-60 Tetra MAX 12VDC/60W Power Supply is wet rated and self-contained. Remote or raceway use with 1 output bank. Class 2 Power Supply: Input Voltage 90-264VAC.